A brand new way to experience 3D printing
Your first 3D printing experience must be really hard. You spent hours on internet before you learn the process for your first 3D print. You looked out for 3D models which you like. You downloaded a slicer without knowing what to do.
And then, when you finally start your first print, you experienced mostly first layer problem. You hardly can print anything that stick to the bed. You thought 3D printing was easy. You spent a lot of time on tuning the machine before you can actually print something successful. Wasn’t it?
We try to eliminate most of the beginner problems for you. Why bother to purchase a printer that you need to tune for weeks before you can work? With our printers, you do not need to worry about printing at all. We intend to build a 3D printer that is small in size and has an ability to do high speed prototyping without any headache. We have built a printer that you can fit it at any corners of your home or office. It is a closed chamber printer. It effectively reduce the smell when printing. It prints ABS. At most of the time, you do not need to worry about machine adjustment. We want you to spend more time on designing, not machine tuning.
About Us
We are a Hong Kong based company providing 3D printing related service.
We are located at Kwun Tong Industrial Centre. We used to be in traditional offset printing business since 1994. We started 3D printing back in July 2019. We have built numbers of 3D printer since then.
Our Skills
We hand build our own 3D printers.
Farm size: 10 printers
Printer size: 120x120mm | 160x160mm | 250x250mm | 550x550mm
We spent a year focusing on building 3D printer. Here is our build list in 2020-2021.
- Prusa Original (254x210mm) x 1
- Prusa Bear Upgrade (254x210mm) x 12
- BLV Standard (400x300mm) x 1
- BLV Custom (525x525mm) x 1
- Voron 0 (120x120mm) x 14
- Voron 2.4 (250x250mm) x 2
- Voron 2.4 (550x550mm) x 1
- Tiny-M (160x160mm) x 4
- Annex Engineering Masherbrum-K1 (250mm, ongoing project) x 1
- Annex Engineering Masherbrum-K1 (>500mm, ongoing project) x 1
Total 3D printers built: 36
things we do
We are committed to 3D printing. We focus on 3 categories:
1
DIY 3D Printer Parts Resell
- Our own parts suppilers. Directly from factory.
- Parts tested on our machines for more than 9 months. Quality ensured.
- Lowest cost for your build.
- Also help to custom make large quantity parts from factory, e.g. motors, linear rails, and silicone heating pads. Contact us for more details and quotes.
2
3D Printing Support for Design and Education
- All year round technical support.
- Experienced and licensed professor help to setup your own curriculum.
- Budget or high quality filament supply.
- Slicers pre-setup. Teachers need not to worry anything.
3
Industrial 3D Printing
- Precise and insanely fast prototyping.
- Industrial grade material support: ABS, PC, Nylon.
- Large size 3D printing support.
- Up to 0.5 meter (500mm) at this moment.
- Will build printer at 1 meter in the future.
3d printing for designer and educator
Our goal is to promote 3D printing to schools and design companies.
we help you 3d print at school

Top of the line printer
We build our printers based on open-source design. We modified the design and custom tuned the firmware to run it extremely stable and fast. We have tested our machines for more than 12 months. We guarantee to supply only good quality parts and filaments.

On-site service
Our Maintenance Service Plan fully covers all our printers for 12 months. You do not need to worry about any maintenance. We provide on-site repair or printer replacement, depending on situation.

3D print 101 lecture
We lecture our customer to learn 3D printing basics and how to use our printer. We will not just sell you a printer and let you learn it yourself. We make sure that you know what is 3D printing and how to use our printers.

Hot deals
Education and design fields in Hong Kong are our top priority. We would like to make all kinds of cooperation with education organizations and design companies, giving special deals in promoting 3D printing in Hong Kong.
Contact us: info@digiprint.com.hk.
our machines
industrial 3d printing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur libero purus, luctus nec fermentum et imperdiet sed sapien. Curabitur libero purus, luctus nec fermentum et imperdiet sed sapien.
Choose your plan
$4800
Single machine
- Bearvon/ Bearvon M*
- 30 days full service repair
- 1 year free parts replacement**
- Color at your choice
$6000
Single machine w/ 1 year full service
- Bearvon/ Bearvon M*
- 12 months full service
- Technical support
- Color at your choice
$800/mo
Single machine rental w/ full service per year
- Bearvon/ Bearvon M*
- 12 months full service
- 4 rolls of filaments every month
- Color at your choice
*Bearvon M adds $1200 to the total price.
**Does not include: nozzle, heatblock, heating rod, hotend thermistor, heatbreak, PEI plate, and magnetic sticker.
### Warranty will be automatically voided if any modification is made to the printer. ###
Package
Super sale
special DEAL
Sale up to 20% OFF for purchasing more than 2 printers
“If you want something you’ve never had, you must be willing to do something you’ve never done”
-Thomas Jefferson
Do the math.
Vivamus sed convallis magna. Nam metus turpis, ornare eu erat ac, suscipit viverra odio. Curabitur dignissim odio id consequat vulputate. Nullam suscipit mauris quis libero lacinia luctus.
8/10
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce accumsan, odio nec vulputate ultricies, sem neque venenatis risus, sed euismod lectus ipsum sed elit
Read more85%
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce accumsan, odio nec vulputate ultricies, sem neque venenatis risus, sed euismod lectus ipsum sed elit
Read more92%
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce accumsan, odio nec vulputate ultricies, sem neque venenatis risus, sed euismod lectus ipsum sed elit
Read more